Product Introduction

The valve is characterized by: its thick wall thickness, and uneven, irregular shape; rough surface; thermal inertia, slow heating; handling of the collision between the situation is serious. For these characteristics of the valve. And the use of general powder coating spray valve often appear some various problems, my company after some material selection and experiment, developed a special valve powder coating. Special powder coatings for valves not only have the decorative aesthetics of general powder coatings, but also have the following outstanding characteristics:

Product Features

1, has good adhesion, impact performance, and surface scratch resistance, in the valve normal handling in the case of collision, there will be no damage.

2. The baking conditions are: 160 ℃/ 15-20min or 180 ℃/ 10min. This powder has the characteristics of low temperature curing. Compared with the general powder coating requirement of 180 ℃/ 15-20min curing, it can improve the spraying efficiency and energy saving.

3. The high-gloss powder coating used in the valve not only has high gloss and good leveling. Moreover, it does not sag, has good hiding power, covers corners and covers, and the spraying thickness is about 100um.

4, for cast iron valve is a good solution to the problem of defoaming.

5. By adjusting the powder particle size and introducing new materials into the formula, the Faraday effect is overcome to a certain extent, so that the powder is better and the spraying area is large.

6, according to customer requirements can also do a variety of gloss and a variety of texture powder coating.

Application areas

Suitable for gate valves. Globe valves. Plug valves. Ball valves. Butterfly valves and other valves.